Micro SD Card Read and Write Module – the powerhouse for seamless data storage

Unlock the full potential of your projects with our Micro SD Card Read and Write Module. This versatile module is engineered to seamlessly integrate into a wide range of electronic applications, providing efficient and reliable data storage solutions. Whether you’re working on DIY electronics, IoT projects, or embedded systems, this module is your gateway to enhanced functionality and data management.

Micro SD Card Reader Module also called Micro SD Adaptor is mainly to add memory to our Arduino project to store the data, Media etc. The Module is a simple solution for transferring data to and from a standard SD card. The pinout with Arduino as shown in the diagram in below, but can also be used with other microcontrollers. Micro SD Card Reader Module has an SPI interface which is compatible with any sd card and it uses 5V or 3.3V power supply which is compatible with Arduino UNO/Mega. SD module has various applications such as data logger, audio, video, graphics.

There are total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply.

Interfacing with Arduino Uno:

Special Features of Micro SD Card Read and Write Module:

• Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
• The level conversion circuit board that can interface level is 5V or 3.3V
• Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
• Communication interface is a standard SPI interface.

Key Features of Micro SD Card Read and Write Module:

• Dual Functionality: Our Micro SD Card Read and Write Module excels in both reading and writing data to micro SD cards. This dual functionality makes it an all-in-one solution for various applications, offering flexibility and convenience.
• Wide Compatibility: Designed to be compatible with standard micro SD cards, this module ensures a hassle-free integration process. Its broad compatibility extends to different card capacities, allowing you to choose the storage size that best suits your project requirements.
• High-Speed Data Transfer: Experience rapid data transfer with this module’s high-speed capabilities. Whether you’re reading or writing data, the module ensures quick and efficient operations, optimizing the overall performance of your projects.
• Plug-and-Play Design: The user-friendly plug-and-play design simplifies the integration process. With easy-to-follow instructions, you can seamlessly incorporate this module into your project, saving you valuable time and effort.
• Compact and Lightweight: The compact and lightweight design of the Micro SD Card Read and Write Module allows for easy integration into small-scale projects where space is a premium. Its unobtrusive size ensures it won’t weigh down your creations.
• Versatile Applications: From data logging systems and security cameras to robotics and wearable devices, the module’s versatility makes it suitable for a wide array of applications. Explore new possibilities and enhance the capabilities of your projects with this adaptable module.
• Stable Voltage Supply: The module is engineered to provide a stable voltage supply to the micro SD card, ensuring consistent and reliable performance. This feature is crucial for preventing data corruption and ensuring the longevity of your storage devices.
• Onboard LEDs for Status Indication: Stay informed about the module’s status with the onboard LEDs. These indicators provide real-time feedback on read and write activities, helping you monitor the performance of your projects.
• Robust Build for Durability: Crafted with durability in mind, this module features a robust build that can withstand various environmental conditions. Its resilience makes it suitable for both indoor and outdoor projects, enhancing its overall lifespan.
• Low Power Consumption: Benefit from the module’s energy-efficient design, ensuring low power consumption during operation. This feature is particularly advantageous for battery-powered projects, extending their runtime without compromising performance.
• User-Configurable Options: Tailor the module to your specific project needs with user-configurable options. Adjust settings such as data transfer rates, power-saving modes, and more, providing a customizable solution for your unique requirements.
• Comprehensive Documentation: Access comprehensive documentation that guides you through the installation, configuration, and utilization of the Micro SD Card Read and Write Module. Our detailed resources empower users of all skill levels to maximize the potential of this module.

Applications of Micro SD Card Read and Write Module:

The Micro SD Card Read and Write Module finds a multitude of applications across various industries and projects due to its versatile functionality. Here are some notable applications:

• Data Logging Systems: Integrate the module into data logging systems for recording and storing data over extended periods. Ideal for environmental monitoring, research projects, and industrial applications requiring comprehensive data analysis.
• Security Cameras and Surveillance Systems: Enhance the storage capacity of security cameras and surveillance systems, allowing for extended recording times. The module’s high-speed data transfer ensures quick and efficient footage storage.
• Embedded Systems and IoT Devices: Power embedded systems and Internet of Things (IoT) devices with reliable data storage capabilities. From smart home applications to industrial automation, the module serves as a crucial component for managing and storing data.
• Robotics and Drones: Integrate the module into robotics and drone systems for efficient storage of sensor data, images, and videos. Its compact size and low power consumption make it suitable for aerial and ground-based robotic applications.
• Wearable Devices: Enable data storage in wearable devices such as fitness trackers and smartwatches. The module’s lightweight design ensures minimal impact on the overall size and weight of the wearable, while providing ample storage for user data.
• Audio Recording Devices: Incorporate the module into audio recording devices for musicians, journalists, or any application requiring reliable and expandable storage. Its high-speed data transfer ensures seamless recording and playback of audio files.
• Automotive Electronics: Integrate the module into automotive systems for applications like GPS navigation, multimedia storage, and data logging. The module’s stable voltage supply and durable build make it suitable for the challenging conditions of automotive environments.
• Educational Electronics Projects: Use the module in educational settings for teaching electronics and programming. Students can explore the principles of data storage, retrieval, and manipulation in various projects, fostering hands-on learning experiences.
• DIY Electronics Projects: Enhance DIY electronics projects with extended data storage capabilities. Whether it’s a weather station, a home automation system, or a custom-built gadget, the module provides ample space for storing project-related information.
• Medical Devices and Monitoring Systems: Integrate the module into medical devices and monitoring systems to store patient data, logs, and other critical information. Its reliable performance and compact size make it suitable for diverse healthcare applications.
• Gaming Consoles and Accessories: Use the module in gaming consoles and accessories to expand storage capacity for game data, updates, and user profiles. Its high-speed data transfer ensures quick loading times and smooth gaming experiences.
• Research and Development Projects: Employ the module in research and development projects where data collection and storage are essential. Its compatibility with various micro SD card capacities accommodates the diverse needs of R&D applications.

Package Includes:

1 x Micro SD Card Reader Module

FAQ

1. who will use this Micro SD Card Read and Write Module?

The WiFi – 2.4G NRF24L01 PA+LNA Wireless Transceiver with Antenna is commonly used by electronics hobbyists, DIY enthusiasts, and developers for various applications such as IoT devices, wireless sensor networks, remote control systems, robotics, Arduino projects, home automation, and custom wireless solutions.

2. what is the use of this Micro SD Card Read and Write Module?

The WiFi – 2.4G NRF24L01 PA+LNA Wireless Transceiver with Antenna is used for wireless communication in applications such as IoT devices, wireless sensor networks, remote control systems, robotics, Arduino projects, home automation, and other custom wireless solutions.

3. Where can we buy this Micro SD Card Read and Write Module?

This product is available online at https://aiiottech.in/product/micro-sd-card-read-and-write-module/and also available at our store in Pudupakkam/Kelambakkam, Chennai-603103.

4. When can I get this Micro SD Card Read and Write Module after placing the order?

RGRJ AIIoT TECHNOLOGIES will immediately ship and deliver the product within 2-3 working days.

5. How this Micro SD Card Read and Write Module is better than other similar products? 

Our Micro SD Card Read and Write Module stands out with dual functionality, high-speed data transfer, compact design, user-friendly plug-and-play, and robust build, ensuring superior performance and versatility.